phillstran wks nicely in this appl and no rust!
> From: Fred Hopengarten <email@example.com>
> To: firstname.lastname@example.org
> Subject: [TowerTalk] Backstays
> Date: Tuesday, May 06, 1997 1:21 PM
> In the massive storm of April 1, 1997, the third largest snowfall in the
> history of the Boston area, I lost backstays on three TH6/TH7's. Two on
> one tower, and one on another.
> Examination shows that the backstay wire had rusted through. The plated
> u-bolts and saddles were also heading for the "rust to dust" stage of
> I am now contemplating a trip to Bliss Marine, to buy 1/8" stainless
> steel guy wire. This marine supplier also has a $20 device which uses a
> socket wrench to tighten small nico-press style holders (for about 48
> cents each) to hold the backstays in place. The big crimping tool is
> On the other hand, K1LZ is recommending that I use wire rope in a plastic
> cover, with 54 cent plated u-bolts and saddles (small ones).
> I recall that W1RR, a smart person in my judgment, has used dacron rope
> for backstays, as well as Phillystran (on BIG booms).
> The project is: backstays for a 24' boom TH67/TH7. What would you
> Fred Hopengarten K1VR
> Six Willarch Road
> Lincoln, MA 01773-5105
> permanent e-mail address: email@example.com
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: firstname.lastname@example.org
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: email@example.com
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com