I recently received this message from a new Orion user. He's waiting
for his rotors to be shipped, but in the interim he says:
> You will need three number 12 and two number 22 but the two number
> 22 pairs need to be shielded from the three number 12's. You MUST
> shield those number 22's because there is pickup on the positioning
> leads from the AC on the motor leads and if no shielding is
> present, your indicater will not work right.
Anybody with experience of the OR2800? If so:
1. Is this correct?
2. Can anyone recommend a cable or cables that will fit the bill?
Chris R. Burger
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com