What method do you plan to use to connect the fittings to the pipe?
If by welding, you'll need access to an AC, high frequency,
heli-arc welding machine. If by threads, you'll have to use at least
schedule 10, or perhaps schedule 20 for ample wall thickness in
which to put threads. There are available socket-weld, butt-weld,
and threaded aluminum fittings.
> Date: Fri, 9 May 1997 06:47:05 -0400 (EDT)
> From: "L. B. Cebik" <firstname.lastname@example.org>
> To: email@example.com
> Subject: [TowerTalk] Aluminum elbows ??
> Are there any such things as aluminum elbows (similar in construction to
> the copper pipe elbows used in plumbing)?
> IF there are, I need 4 for corners of an experimental antenna using 1" OD
> al tubing. I have never seen any such thing and do not want to put copper
> at the corners of the aluminum elements, hence, my question.
> All replies (even ones confirming they do not exist) appreciated.
> LB, W4RNL
> L. B. Cebik, W4RNL /\ /\ * / / / (Off)(423) 974-7215
> 1434 High Mesa Drive / \/ \/\ ----/\--- (Hm) (423) 938-6335
> Knoxville, Tennessee /\ \ \ \ / / || / (FAX)(423) 974-3509
> 37938-4443 USA / \ \ \ \ || firstname.lastname@example.org
> URL: http://funnelweb.utcc.utk.edu/~cebik/radio.html
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: email@example.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: firstname.lastname@example.org
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com