Towertalk
[Top] [All Lists]

[TowerTalk] Re: Insulated Elements

To: <towertalk@contesting.com>
Subject: [TowerTalk] Re: Insulated Elements
From: donovanf@sgate.com (Frank Donovan)
Date: Sat, 10 May 1997 23:18:41 -0400 (EDT)
Hello Andrew!
I cut the phenolic sheet into 6 x 6 x 1/2" pieces for mounting 20, 15 and
10M elements to the boom.  I do not use split driven elements, rather I
use T-matched driven elements; however, a piece of Type LE Phenolic rod
inserted into the two element halves would provide excellent strength,
then you could mount that assembly to the phenolic plate.
73!
Frank
W3LPL
donovanf@sgate.com

On Sat, 10 May 1997, Andrew Williamson wrote:
> 
> What size do you cut this 12"X12" sheet into?  4 of 12"X3" or 4 of 8"X4"
> with a little 'waste'.  I find it difficult to imagine a piece of
> plastic 3" wide by 1/2" thick is capable of holding a 20M split driven
> element.  That has a big bending moment.  Do you have a piece of
> fibreglass between the element halves to counter this force, or how do
> you mount the halves to this sheet?
> 
> I'm just wondering because we will have to take the 20M yagi at GI0KOW
> down before CQ WPX CW (major SWR problems), and I have been wondering
> for some time how to improve the mounting method for the split driven
> element and this sounds ideal.  At the moment we use a rather poor
> construction of PVC and aluminum piping over the driven element halves.
> Vy 73,
> Andrew Williamson GI0NWG / AC6WI


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com

<Prev in Thread] Current Thread [Next in Thread>