[Top] [All Lists]

[TowerTalk] Locating power line noise

To: <>
Subject: [TowerTalk] Locating power line noise
Date: Wed, 14 May 1997 08:58:02 -0500
Charlie, W0YG, gave a very good brief tutorial on sniffing noise.  Here
is a bit of additional info.

>< Please note AM is the mode to use when trying to locate noise,

SSB is also a good mode for locating noise.  I use a Santec 2M Handi-
talkie (made by Bellcore) that has both FM and SSB.  Any of the vhf or
uhf multimode rigs can be used for this, and if you have one of the
Icom/Yaesu etc. multimode rigs that can run off a battery pack then so
much the better so you can walk around with it.

>If I cannot drive into an area, such as someone's back yard where I feel
>noise is originating, I also carry a 2M yagi with me that I can sniff
>for noise at long range.

I use my old 2M transmitter-hunting quad.  Sometimes tilting the quad
sideways to change the polarization makes the noise much stronger
and easier to find.

>Hope this helps those who are hampered by power line noise problems.

Ditto.      73, Dave WD5N

FAQ on WWW:     
Administrative requests:

<Prev in Thread] Current Thread [Next in Thread>