About 20 years ago I tried making a 40-10 inverted vee using flat
4-conductor rotor cable. I had seen an article describing it. Didn't
work, very high SWR on all bands. I discovered that as I peeled
away each set of wires and fanned them out a few feet, one band
at a time, that band would then have a decent SWR. Ended up with
all four bands fanned out and worked okay that way. Would have
been a lot easier to have done it that way to start with. Good luck.
Dave WD5N (/HC8, /KP2, FO0HAR, ZK1NAR, VP5EA)
< email@example.com >
>At 01:56 AM 5/19/97 +0000, you wrote:
>>Anyone have any luck with swr/performance using rotor wire
>>to make a multiband dipole from 160 meters on up?
>>What type of rotor wire did you use, flat or the round
>>8 conductor type?
>>Thanks in advance and cu on cw.
>FAQ on WWW: http://www.contesting.com/towertalkfaq.html
>Administrative requests: towertalk-REQUEST@contesting.com
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com