At 11:32 AM 5/29/97 -0700, you wrote:
>In putting together some new-out-of-the-box KLM beams recently for W6EEN, I
>noticed that the conductive paste they now supply is different than before.
>I recall that their older stuff for many years was the coppery-looking stuff
>(which I never liked... in my experience it actually ENHANCED the corrosive
>process around the s.s. studs and aluminum straps, especially near
A couple of months ago on another Noalox thread, I posted the same information.
I received a couple of replies that indicated they thought I was out of my mind.
What can I say. The kt34a quit working after about a year. I cleaned the
stuff off, used Noalox, and then ss screws. No problems since (4 or 5 years).
I live about 100 yards from Gulf of Mexico and salt affects EVERYTHING.
You should see all the arcing on the power line equipment at night after a
good south wind. Yep, it's a killer line noise. Pray for a rain.
But in their recent kits their paste is a type I've never seen.
>It's a very silvery-looking, thin paste... not "watery", but not as thick as
>NOALOX either, and not as dark in color. I assume it is extremely
>fine-grained aluminum dust carried in some medium. Time will tell, but it
>Re NOALOX separation, yes, I have seen it also but I just stir it up with a
>screwdriver once a year.
>Then, the screwdriver won't corrode.
>FAQ on WWW: http://www.contesting.com/towertalkfaq.html
>Administrative requests: towertalk-REQUEST@contesting.com
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com