The following message was posted on the Topband reflector.
I suspect that there are some of you on Towertalk that could
help this guy so I'm posting it here as well. Please reply
directly to email@example.com and NOT to me! 73, W4ZV
>Greetings from Korea. I recently subscribed to the list.
>I installed a half wave length Zepp (over 80m long) for 160m
>on the top of 20th floor aprtment house and I fed it by 450 ohm
>ladder line(ready made one) with end-feed style because
>center-feed is little bit difficult for my location.
>I tried to tune the zepp with my homebrew tuner for all HF bands.
>My tuner has "SPC" transmatch configuration with 4:1 toroid core
>I found out tuning avove 40 meters are impossible.
>I believe this kind of antenna configuration needs real balanced
>tuner with capablity of switching between serial and parallel
>tuning according to the impedance of each bands.
>I tried to find out any references for this situations, but failed.
>Does anyone can comment me? Any Inernet sources for constructing
>such kind of tuner?
>73! HL5BPL from Ulsan, Korea (firstname.lastname@example.org)
>P.S. Frequency range of 160m for Korean (HL and DS) stations are
> 1.800 thru 1.825 MHz and there are very low activities
> currently on this band.
>FAQ on WWW: http://www.contesting.com/topband.html
>Administrative requests: topband-REQUEST@contesting.com
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com