I was very shocked to find rust in my Rohn thrust bearing. It is a 1975
model, and when I took my tower down to move QTH's I found it took a wrench
to turn the bearing. The ball bearings were covered in rust. I sprayed
several kinds of cleaner in the bearing, finally I coated the bearings with
a red type grease. From now on when I tilt the tower to work on the beams,
I spray a very good quality lube in the bearing, People told me they didn't
need lube..ha ha ha , don't believe them. Mine wouldn't hardly turn before
I cleaned and lubed the ball bearings. Most people on these reflectors have
never seen a thrust bearing, they just read and quote the specs.
73, Mick W4YV
> From: Charlie Summers <firstname.lastname@example.org>
> To: email@example.com
> Subject: [TowerTalk] Lube a Rohn 45 thrust bearing
> Date: Saturday, June 14, 1997 4:03 PM
> Hi to all!
> Well thanks for the answers. The concensus seems to be lube them with
> some kind of lithium or moly grease. It also seems that most folks
> think lubing better than not lubing as it gets rid of that excruciating
> metal to metal sound.
> Mine is lubed and going up today!
> Thanks again for the answers.
> Charlie, W0YG..>>
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: firstname.lastname@example.org
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: email@example.com
> Search: http://www.contesting.com/km9p/search.htm
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com