In a message dated 97-06-14 20:29:22 EDT, firstname.lastname@example.org (Lee Buller)
> To mount a rotor lower in the tower...what do you guys suggest? I've done
> this before, but have cut a rung on the Rohn 25 G to do so. Doesn't make
> feel good. So, how do you get a HAM IV in the tower lower than the top
> shelf without cutting a rug. Do you "bend" on the diagonal braces?
A Ham IV will go into Rohn 25G with no rung cutting. You have to push
and pull and use some encouraging verbage but it WILL go in.
Not so for the T2X.
73, Steve K7LXC
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com