The HyGain 400 Roto Brake instruction/Op manaul says:
Rotating Torque: 4000 inch pounds
Braking Torque: 5000 inch pounds
Max Vertical load: 800 pounds
Max bending moment at top bearing: 150 ft/lbs lateral thrust
Mast Size: 1.25 to 3 inch outside diamater
Weight: 28.5 lbs
Output shaft speed: 1 rpm
Size: 7.5" W x 9.5" L x 14" H
Power requirement: 110-120v, 50-60 hz/ 2 amps
Fuse: 3AG/2.5 amp/ MDL
Motor: 1/10 hp perm. split capacitor
Control System: Fully transistorized self synchronized
Cable: 5 conductor
Position accuracy: + or minus 15 degrees
Resetability to previous bearing: + or minus 5 degrees
Is that what you wanted?
Good luck with it.
Jim Pruitt, WA7DUY
At 09:48 PM 6/18/97 -0700, you wrote:
>We at N6IJ, have been donated a HY-Gain ROTO BRAKE antenna Rotator. Very
>Beefy, and obviously an old model, it has no Docs. Anyone out there have
>any docs for this monster? Or any specs as to Antennna Sq Ft. capacity,
>or rotating torque, brake torque, etc?
>Tnx, DX, 73, de Pat, AA6EG/N6IJ, The contest Station from the Government...
>FAQ on WWW: http://www.contesting.com/towertalkfaq.html
>Administrative requests: towertalk-REQUEST@contesting.com
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com