> Many years ago I toured a INCO nickle processing operation.
> There I saw huge rotating drums (well in excess of 100 tons)
> crush ore. The center shafts of these drums were not rotating
> in ball bearings but in blocks of wood that had been soaked in oil.
> Since I saw that, I've always thought that would be a good way
> to handle masts. Place a block of oil soaked wood in a metal
> frame on top of the tower and drill the hole to match the mast.
> Anyone doing this?
> - Frank VE7AV email@example.com
When I operated from Woodlands, Montserrat in 1983 the top thrust
on the tower was a wooden block. The mast supported a A3 with a 6 meter
yagi stacked above it. It worked.
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com