On 6/26/97 11:09, Flanders, Jim at firstname.lastname@example.org wrote:
>Determining the location of roof beams:
>So some of the tools I bought ... are ultrasonic stud finders.
>After a recent post, I went on the roof between the
>thunderstorms here in Texas and tried it for finding
>roof beams. The $19.95 variety could work eventually, but it is very
>frustrating and time consuming because of the var-
>iations of composite shingle thickness.
Even the $20 ultrasonic stud finder can lead you astray. The stud finder
merely finds the densest part of the wall.
Here's a story: I was putting up a quilt hanger for my wife. I had these
great wall screws that needed to go into a stud. The hanger required me
to carefully space to clips that went over the wall screws.
So, using my ultrasonic stud finder, I marked out the spacing of the
studs in the wall. Since it was an outside wall (filled with insulation),
the studs weren't very pronounced, and there were some false (weak)
readings. Studying the marks, something didn't seem right, but I picked a
couple of studs and proceeded to drive the screws into the wall.
The first screw acted rather strange. It went through the sheetrock ok,
but then hit something. Since I was using an electric screwdriver, I
applied a little pressure, and the screw went into the wall as easy as
Once the screwdriver was off, I heard a faint sound - "sssss". After a
moments thought, I backed the screw out a half-turn. The sound turned to
"SSSSSSS". I took the screw out. The subsequent rush of gas out of the
hole in the wall made a tremendous noise, and I quickly got everyone out
of the room.
The ultrasonic stud finder had lead me unerringly to the densest object
in the wall -- I had punched a hole directly into the copper tubing for
my upstairs heat pump. Someone commented that I couldn't have put the
screw more squarely into the tube if I had measured it.
(Tube was fixed the next day. It was a cold night upstairs that night.
(Big) hole in the wall was fixed the next week. Quilt hanger wasn't put
up for another 2 months.)
So, before you anchor anything to a "stud" in the wall found with one of
these stud finders, make sure you know what you are fastening to.
Bill Coleman, AA4LR, PP-ASEL Mail: email@example.com
Quote: "Not in a thousand years will man ever fly!"
-- Wilbur Wright, 1901
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com