On Sun, 29 Jun 1997 15:50:15 -0400 Bruce Makas <email@example.com> writes:
>It seems to me that it would be easier to drill round holes with a
>powered post hole digger for the guy wire anchor points than try and
>them by hand. If I use the same amount of concrete as spec'd by Rohn
>their rectangular anchor, wouldn't I be OK? For anchor "4b" that would
>Let's see, 3.14(1)(1)=3.14 sq ft circle and 9cu ft (.67 cu yd) = 6
Ah ... a cubic yard is 3 x 3 x 3 or 27 cubic feet.
27*.67= 18.09 cubic feet required (using your figure)
18.09/3.14=5.76 feet depth required for 1 foot diameter;
18.09/6.28=2.88 feet depth required for 2 foot diameter.
Not sure whether I'd try to second guess the engineering.
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com