On Tue, 15 Jul 1997 00:45:52 +0000 "N9YXA-Cedrick Johnson"
>I have a problem. When I use 40M CW/SSB, my Radio shack 12V power
>supply powering my 2M equipment. When I key down, the voltage surges
>to around 15 volts, triggering the protection circuit in the
>radio.... Any suggestions on how to cure this problem?
Never use one of these Radio Shack power supplies for any
piece of valuable equipment. A local ham fried a dual band
HT when the regulator failed. There is no overvoltage
protection in the event of regulator failure.
Dave Hachadorian, K6LL
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com