In a message dated 97-07-15 18:29:11 EDT, firstname.lastname@example.org (Bruce Makas) writes:
> I intend to partially bury the bottom section of my Rohn 45 tower in
> as per spec. Is there any advantage to using the short SB45G vs using a
> regular 10 foot section?
The SB short base is a little cheaper on a per foot basis. It doesn't
have the leg flanges on it so it's a little cheaper to manufacture. Other
than that, the materials are identical.
73, Steve K7LXC
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com