--------- Begin forwarded message ----------
Subject: Re: [TowerTalk] distance to guy wires
On Fri, 18 Jul 1997 22:23:40 -0600 Mike Fatchett <email@example.com>
>Sorry but I seem to have forgotten my geometry.
>Can someone tell me how to calculate the distance from the tower to
>the guy wires from different spots on the tower? I need to know if I
>have enough room for my 2nd antenna to rotate.
The simple solution is to make a scale drawing and then measure it.
No math and it gives a good visual idea of the geometry.
For example, at one inch per foot, you plot a vertical line representing
the tower height. Then go out horizontally in inches equal to the number
of feet your guy anchors are from the tower. Connect the anchor points
to the tower at the appropriate heights and you have an accurate
representation of your tower.
To determine the turning radius under your guy wires, measure the
distance between the tower and the appropriate guy wire, remembering
your scale factor (of 1 inch = 1 ft) and you've got it. NO MATH.
If that scale doesn't fit on your paper, use something smaller,
like 1/2 inch = 1 ft to represent tall towers. Using graph or
quadrille paper makes it even easier.
de Tom N4KG
--------- End forwarded message ----------
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com