[Top] [All Lists]

[TowerTalk] Antenna and tower ID help photos.

To: <>
Subject: [TowerTalk] Antenna and tower ID help photos.
From: (Bob Duckworth)
Date: Tue, 29 Jul 1997 16:01:48 +0100
These are all jpeg (jpg) and for detail, on order of 
100 to 200 kbyte. 10" x 8" at 72dpi

40 meter 3elements approx 42' overall fasten to these centers
and a coffee can sized plastic (coil?) lives at center just
over the U-bolt. Standoff are insulators. So far suggestions
are that this is an older Mosley. 3" boom dia.
 <>      123k

40m element halves (6 total) half element approx. 26'
plus the elements from as of yet unidentified 
Mosley 3 ele yagi (CL33? TA33? 10/15 only?)
8' center to trap, 12 center to end.
<>       81k

Crank up tower: model?? manufacturer??          134k

base section
<>        159k
<>        212k

bottom brackets for anchors
<>               182k

brackets to left for winch
<>        133k

pulleys at tops of sections.
<>        225k

Me, after digging the crankup out from under 8 years growth
of weeds, taking down a 50' Rohn 25, and moving them and
all the antennas (3 ele HF yagi, 6m yagi, and 2m collinear were
all up!) home. Marty AA4RM helped and I'll get a photo of him
next time he comes over.
<>          72k

The crankup was moved with ease by a 'flat bed' type
wrecker for only $81. Got to thinking, Truck, ramp, 
come-along....and realized that the wrecker had it all plus
additional help.


FAQ on WWW:     
Administrative requests:

<Prev in Thread] Current Thread [Next in Thread>