Towertalk
[Top] [All Lists]

[TowerTalk] Equalizer plates - a PC conspiracy?

To: <towertalk@contesting.com>
Subject: [TowerTalk] Equalizer plates - a PC conspiracy?
From: dick@merlin.libelle.com (Dick Flanagan)
Date: Fri, 8 Aug 1997 09:28:15 -0700
>At the posited high wind force, the 5/16" guy
>will put, say, 10,000 pounds of tension on the equalizer plate, which will
>rotate to "equalize".  Since the holes in the plate are equally spaced about
>the pivot (anchor) hole, equal force will be exerted on the 3/16" guy, far
>exceeding its rated capacity.

It would seem to me that the rotational force applied to the smaller guy
would be far less than the direct force applied to the anchor.

I am obviously missing something somewhere.

73, Dick

--
Dick Flanagan W6OLD CFII Minden, Nevada
Visit http://www.delphi.com/electronic/



--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search

<Prev in Thread] Current Thread [Next in Thread>