The TS-570D is different in its internal diode matix then the ones sent to
North America. You might want to check with the dealer and he will be able
to obtain information from Kenwood that will allow you to do this. As an
example, an North American radio from Kenwood has a "K" stamped on the
outside of the box. This indicates a North American band plan (I'm not
sure if the eprom is different between Europe and NA...with Icom is is, and
Yaesu only ships one brand all over the world and changes the diode matrix).
In Canada, the dealer usually provides this information free of charge to
the buyer. I suggest the owner of the radio contact the dealer and ask for
the information. Kenwood does have it available.
good luck...mike VA3MW
At 10:38 PM 9/2/97 +0200, ON6AA Marc wrote:
>I wonder if somebody could help me to modify a TS570D.
>He has only 10 watt on 160 meter and we may use 100W in the next fieldday !
>I'm sure it must be possible to change the 10 watts in 100 but do not know
>Thanks in advance.
>Visit our association home page at : http://www.uba.be/index.htm
>where you will find a lot of links and information !
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com