In a message dated 97-09-03 11:34:02 EDT, email@example.com writes:
> I have used preforms and guy wire from the local EMC. I noticed in a
> recent message from K7LXC that some preforms he uses have two marks. The
> ones I have used have only one mark on them. I am using them around
> insulators and to date have had no failures. I wonder if there are any
> negative comments on using the EMC guy wire and preforms. They sure are
> the right price if you can buy them a box at a time.
These are the WRONG Preformed grips for tower applications. Utility
usage is usually for short runs and non-tensioned applications. They are NOT
suitable for EHS tensioned tower use.
There are up to 7 grades of cable for a size with different lays, yield
strengths and compositions. EHS is just one of those cables and has its own
standards. In addition, the utility preforms are shorter than the EHS
versions and may be the wrong lay for EHS.
The LXC Prime Directive is to "do what the manufacturer says". Both Rohn
and Preformed Line Products are very specific on appropriate hardware,
specifications and applications. DO NOT violate their, or any other
73, Steve K7LXC
TOWER TECH -- professional tower supplies for amateurs
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com