Towertalk
[Top] [All Lists]

[TowerTalk] Modify a Pro 67B

To: <towertalk@contesting.com>
Subject: [TowerTalk] Modify a Pro 67B
From: g.biancofiore@patchir.med.unipi.it (Gianni Biancofiore)
Date: Sat, 06 Sep 1997 19:34:58 +0200
Hi everybody & thanks for reading,
here a triky question:
what can I expect from a Mosley Pro 67B if I increase the distance between
the two driven elements of, let's say, 10 inches ? Will it work properly or
not ?
The fact is that I need to change my guyed tower with a freestanding
supplyed with a hazer to get the bean down to ground (here wind blows
heavyly). I founded the freestanding at a very convenient price but it's 31
inches on each of its 4 sides and the distance between the 2 driven elements
of the Pro is 32, so....I need a litle bit more space to lower the beam.
I sent a fax with the question to the Mosley Corp. but didn't get any reply
(maybe it's too expensive for them to send back a fax to Italy !!!).
My best thanks for your attention
73's
Gianni   IK5RQL
-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-                         
 Dr. Gianni Biancofiore                
 U.T.I. Trapianti            
 Ospedale Cisanello          
 Pisa  - Italia -            
-.-.-.-.-.-.-.-.-.-.-.-.-.-.-.-


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search

<Prev in Thread] Current Thread [Next in Thread>