[Top] [All Lists]

[TowerTalk] Modify a Pro 67B

To: <>
Subject: [TowerTalk] Modify a Pro 67B
From: (T. A. Russell)
Date: Sat, 6 Sep 1997 13:02:24 -0600
At the VERY  LEAST, you can expect to spend a LOT of TIME
figuring out how to feed the antenna to get a good match
on all three bands.  That IS one thing that MOSLEY does
seem to do well.   

de  Tom  N4KG

On Sat, 06 Sep 1997 19:34:58 +0200 Gianni Biancofiore
<> writes:
>Hi everybody & thanks for reading,
>here a triky question:
>what can I expect from a Mosley Pro 67B if I increase the distance 
>the two driven elements of, let's say, 10 inches ? Will it work 
>properly or
>not ?
>The fact is that I need to change my guyed tower with a freestanding
>supplyed with a hazer to get the bean down to ground (here wind blows
>heavyly). I founded the freestanding at a very convenient price but 
>it's 31
>inches on each of its 4 sides and the distance between the 2 driven 
>of the Pro is 32, so....I need a litle bit more space to lower the 
>I sent a fax with the question to the Mosley Corp. but didn't get any 
>(maybe it's too expensive for them to send back a fax to Italy !!!).
>My best thanks for your attention
>Gianni   IK5RQL
> Dr. Gianni Biancofiore                
> U.T.I. Trapianti            
> Ospedale Cisanello          
> Pisa  - Italia -            
>FAQ on WWW:     
>Administrative requests:

FAQ on WWW:     
Administrative requests:

<Prev in Thread] Current Thread [Next in Thread>