I have been out this weekend putting guy grips on guywires and I would
like to add to Frank Donavan's excellent advice. As someone pointed out
on this reflector recently, a screwdriver is very helpful in finishing
the last wrap of the grips. The leading wire tends to fold under the
other wires and the flat-blade screwdriver will pop it into place. The
grips are rated at about the same strength as 1/4" cable, with the last
turn properly in place.
Rick Wells wrote:
> OK, got all the right stuff, Big Grips for 1/4 inch EHS, the 1/4 inch
> EHS cable, 3/8 inch thimbels, etc.
> So now, how do I put them on?
> 1. There are two yellow paint marks on each, 2.5 inches apart, about
> 5.5 inches from the top loop. What do these mean?
> 2. One leg of each grip is a bit longer than the other. Reason?
> Which leg do you wrap on first or doesn't it matter?
> 3. Looks like the inside of the grip is coated with something
> abrasive, hopefully to stick well. Can grips be removed and
> reinstalled or does this coating get damaged in the process?
> 4. Anything else I need to know? (be kind...)
> TNX & 73,
> Rick, W2RW
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: email@example.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: firstname.lastname@example.org
> Search: http://www.contesting.com/km9p/search
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com