[Top] [All Lists]

[TowerTalk] Nylock Nuts

To: <>
Subject: [TowerTalk] Nylock Nuts
From: (
Date: Sat, 13 Sep 1997 11:13:05 -0700 (PDT)
Good afternoon.

The end of the nut without the nylon insert goes on the nut first. The nylon 
insert is on the outside of the nut (not against the joint).

If using these for element construction, be especially careful not to 
overtighten them. Doing so can easily compress the tubing into an oval and 
might render it impossible to disassemble.

Have a good day and 73,
                        Tom, N6BT
                        Force 12 Antennas and Systems
                        (Home Page )

FAQ on WWW:     
Administrative requests:

<Prev in Thread] Current Thread [Next in Thread>