If it's that hard to pound a ground rod in this "soil", can it really be
conductive enough for a useful ground? If there are enough of them, I think
your lengths of 1 1/2" strap will do a much better job (Polyphaser's book on
lightening protection recommends this approach for mountaintop installation
where there's nothing but rock.)
73, Dick, WC1M
>From: Dick.Flanagan. <firstname.lastname@example.org>
>To: Bruce Goldstein . <email@example.com>
>Cc: firstname.lastname@example.org <email@example.com>
>Subject: Re: (Fwd) [TowerTalk] Driving ground rods
>>At 10:25 AM -0700 9/15/97, Bruce Goldstein wrote:
>>>I used the water method and was able to drive the 8 foot rod in less
>>>than 10 minutes without even using a ladder. Just stuffed the hose
>>>down and kept alternately pushing and pulling the rod.
>>And then there is western hardpan. Two "professional" laborers were able
>>to drive in two 10' ground rods with sledgehammers in only three-hours
>>time. Since my planned ground field called for 35 rods, I was looking at
>>two man weeks of professional labor.
>>We tried water-drilling (nothing), small electric jack hammers (nothing),
>>large pneumatic jack hammers (bent the rods) and carbide masonry drills
>>with 6-foot shafts (bound up).
>>Now, I know in my heart that the next step would have worked--namely
>>pneumatic drilling--but I admitted defeat first. I ended up trenching,
>>flooding and burying fifty-foot lengths of 1-1/2 inch copper strap.
>>At some point one needs to listen to the Gods when they say "No." :)
>>Dick Flanagan W6OLD CFII Minden, Nevada (South of Reno)
>>FAQ on WWW: http://www.contesting.com/towertalkfaq.html
>>Administrative requests: towertalk-REQUEST@contesting.com
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com