I would suggest that you take the connector off, and use a two pair of
four wire trailer connectors arranged so you can never connect them
wrong ie one trailer side and one car side connected to the rotor and
their mates connected to the cable.
The local discounters have hooded connector set available for $1.99. I
just wrap the seam line with cheap electical tape and call it good.
The purist may want to use something better to seal the joint, but my
luck with rotors says that the tape will last longer than the rotor
rebuild. But then I buy my rotors used at hamfests and overload them,
then buy another one when it quits working.
Tower climbing and rotor replacement could be a competitive sport. ;-)
de n0yvy steve
> Greetings --
> My host, W6OAT, is in the final throes of assembling a nice new tower
> and antenna system at his lovely hillside location above the San Francisco
> Bay. He is installing an Orion 2300 (the older version) and it has a pigtail
> out of the rotator that has a 7-pin, black molded plastic male connector on
> the end. The problem is that Claudius, one of his cats, has managed to lose
> the connector so we need a replacement.
> M2 wasn't able to help and he needs the female connector. If you have a
> set, he would be interested in it also.
> If he can't find a connector, we'll probably have to hard wire it with
> butt connectors.
> 73 and tnx for your help, Steve K7LXC
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: firstname.lastname@example.org
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: email@example.com
> Search: http://www.contesting.com/km9p/search
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com