Towertalk
[Top] [All Lists]

[TowerTalk] matching bolt grades to the application

To: <towertalk@contesting.com>
Subject: [TowerTalk] matching bolt grades to the application
From: ve6jy@freenet.edmonton.ab.ca (Don Moman)
Date: Thu, 9 Oct 1997 21:36:34 -0600 (MDT)
My choice would be likely the grade 5 bolts, a good compromise between
strength and brittleness. Gr 8 is very strong but in some cases will fail
where a Gr 5 won't - I routinely lost 1/2 inch Gr 8's in a pinned mast
(using 2 of them) turning a large log periodic and replaced with Gr 5 and
they have lasted 5 years or so. They may be slightly deformed at the shear
pressure points but they don't break clean like the Gr 8 ones did. 

73 Don

VE6JY is Don Moman               email: ve6jy@freenet.edmonton.ab.ca 
Box 127 Lamont, Alberta
T0B 2R0  (403) 895-2925

On Thu, 9 Oct 1997, Ron Majewski wrote:

> 
> Hello to all-
> 
> I'm installing a roof tower on my house and have a question about
> bolt grades.  My local hardware store sells grade 3, 5, and 8 bolts.
> The tower loading will place some bolts under tension, while others 
> will be under shear.  The manufacturer makes no recommendation as to 
> bolt grade.
> 
> Are there any rules for choosing bolt grades given a specific load
> situation?
> 
> Thanks in advance and 73,
> 
> Ron (W8RU).
> majewski@erim-int.com
> 
> --
> FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
> Submissions:              towertalk@contesting.com
> Administrative requests:  towertalk-REQUEST@contesting.com
> Problems:                 owner-towertalk@contesting.com
> Search:                   http://www.contesting.com/km9p/search
> 


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search

<Prev in Thread] Current Thread [Next in Thread>