About 3 months ago I put up a Cubex 3L 5 band quad on a 52ft tower.
Used to have a Mosley PRO67b before...
Im planning to put a loaded 40 m dipole at the end of the boom , parallel
to the quad reflector..
I modeled the whole set-up thru NEC2 and according to NW , interaction
with 15 and 12m will be limited.
Tried adding a 2nd element for 40m but this interacts vy heavy with 15&12m.
GL with the project Joe.
73 de ON7NQ Danny.
e-mail : ON7NQ@GLO.BE
dx-cluster : ON4DXA
bbs : ON7NQ@ON6AR.#AN.BEL.EU
snail mail : Danny Mees
Van De Reydtlaan,86
B E L G I U M
Van: N8ti <N8ti@aol.com>
Aan: firstname.lastname@example.org <email@example.com>
Datum: maandag 3 november 1997 12:14
Onderwerp: [TowerTalk] quads and loaded dipoles
>I am going to put up a 10 through 20 meter quad on my 50 foot tower. Any
>ideas on what would happen if I stuck a cushcraft loaded rotatable dipole
>40 meters up there with it where the dipole was actually inside the quad?
>FAQ on WWW: http://www.contesting.com/towertalkfaq.html
>Administrative requests: towertalk-REQUEST@contesting.com
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com