At 04:29 PM 11/5/97 -0500, you wrote:
>During CQWW my T2X control box suddenly lost direction indication.
>The rotor would still turn, but the meter wouldn't move.
>As it turns out, the 1/8 amp fuse on the back of the meter was
>Any ideas on what might have caused it? Is this just something
>that happens occasionaly?
>I replaced the fuse and everything was fine.
>--Lee - KT4ZX
Lee, check and replace that zener diode in the control box. Same thing
me and after replacement, it worked beautiful. My zener had a thermal
after about 20 to 30 minutes of being turned on. Radio shack sells em' for
a buck. Good luck....Steve.....NW9G
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com