[Top] [All Lists]

[TowerTalk] Fwd: grounding bulkhead

To: <>
Subject: [TowerTalk] Fwd: grounding bulkhead
From: (Jim Bruce)
Date: Fri, 14 Nov 1997 22:06:31 -0500
Yes, I would drill out the holes in the plate for the Polyphasers. I have
that same setup and mounted the plate in a basement casement window after
removing a pane of glass. That also serves as my common point ground. I
would seriously suggest that you use expanding insulating foam on the
outside to prevent condensation on the inside of the plate.
Jim Bruce/NV3V

FAQ on WWW:     
Administrative requests:

<Prev in Thread] Current Thread [Next in Thread>