[Top] [All Lists]

[TowerTalk] rivets, rivets

To: <>
Subject: [TowerTalk] rivets, rivets
From: (Scott Bullock)
Date: Sat, 15 Nov 1997 18:15:23 -0500
Hi Steve, I misunderstood you then, I thought it was the primary fastener
like the rivets, in that case, probably ok, but it still will rust-would
rather pay the extra money for the stainless and not have to worry abt it
10 years from now when it has a problem. The other thing to consider is
that a TEK screw is meant to be used once, if it's taken out, it destroys
the hole to some degree and another screw in the hole will most likely not

At 02:38 PM 11/15/97 -0500, you wrote:
>In a message dated 97-11-15 13:29:14 EST, you write:
>>  i've used these for 18 years, and have seen what happens to them
>>  personally.
>Hi, Scott --
>     Thanks for your comments. As a secondary (to an element hoseclamp)
>element securing device, I'm not too worried about it rusting or removing it.
>It's a backup piece of hardware and I'm not saying that it's the same as a
>rivet or hoseclamp for securing the element pieces.
>73,  Steve  K7LXC

FAQ on WWW:     
Administrative requests:

<Prev in Thread] Current Thread [Next in Thread>