[Top] [All Lists]

[TowerTalk] Correct downward pressure on Rotor?

To: <>
Subject: [TowerTalk] Correct downward pressure on Rotor?
From: (Kenneth Mathews)
Date: Sat, 29 Nov 97 20:48:24 PST
Hello All,
I have a question about the amount of downward pressure that a rotor 
should have on it. I have heard before that you do want some pressure 
on the bigger rotors? Is this true? 
I have a tailtwister 2 and at present it has no pressure on it, the weight 
is at the bearing plate. It has jammed once and I know the bearing 
worked well at installation. Could this have jammed due to no pressure 
on the rotor?. It has 12 feet above the plate and 8 feet below the plate.
All ideas are welcome. Thank you all in advance. The many ideas 
shared here on this reflector has helped me many times over.

FAQ on WWW:     
Administrative requests:

<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] Correct downward pressure on Rotor?, Kenneth Mathews <=