[Top] [All Lists]

[TowerTalk] 402CD Heavy Duty Version

To: <>
Subject: [TowerTalk] 402CD Heavy Duty Version
From: (Tyler Stewart)
Date: Thu, 25 Dec 1997 00:08:33 -0000
I finally found that dowel at a woodcraft type hobby shop.  Definitely not the
easiest thing to find!  You might alternatively use a piece of fiberglass
tubing or rod if you have a local source.  Sometimes you can get good deals on
short pieces that they've cut off.

73, Ty K3MM

-----Original Message-----
From: Dick Flanagan <>
To: Bill Jackson - K9RZ <>
Cc: <>
To: <>
Date: Wednesday, December 24, 1997 18:23
Subject: Re: [TowerTalk] 402CD Heavy Duty Version

>At 2:09 AM -0800 12/24/97, Bill Jackson - K9RZ wrote:
>"This winter," huh?  When I asked them this summer, it was "this fall."
>When I asked them in September, it was "end of November."
>I finally bought a stock 402CD from HRO and the HD kit from Mike Wetzel,
>W9RE.  The net cost was roughly the same as CC's 402BX will be and this is
>a time-proven mod.  Besides, I always like to have someone else Beta test
>V1.0 of anything!  :)
>73, Dick
>PS:  Does anyone on the reflector know where you can find the 1.75" wood
>dowling called for in Dave Leeson's original mod article?  The local lumber
>and woodworkng shops don't stock anything that size and apparently no one
>works a wood lathe anymore.  :(
>>Here's the latest scoop from Cushcraft on their upcoming release of a heavy
>>duty version of the 402CD.
>>Happy Holidays from Nebraska!
>>de Bill, K9RZ
>>     Hi Bill,
>>        Thanks for the e-mail and your continued interest in Cushcraft
>>     products.  The rumor is true!  We should be shipping them this winter.
>>     They will run concurrent with the 402CD.  The new model number is
>>     402BX.
>Dick Flanagan W6OLD CFII Minden, Nevada DM09db (South of Reno)
>FAQ on WWW:     
>Administrative requests:

FAQ on WWW:     
Administrative requests:

<Prev in Thread] Current Thread [Next in Thread>