Towertalk
[Top] [All Lists]

[TowerTalk] Re: Pole mounting the Telrex 3 el tribander

To: <towertalk@contesting.com>
Subject: [TowerTalk] Re: Pole mounting the Telrex 3 el tribander
From: becker@SPRINTMAIL.COM (Tony and Celia Becker)
Date: Sun, 28 Dec 1997 09:17:33 -0700
Hi All!

At 06:34 PM 12/26/97 EST, Steve Morris wrote:
>     First of all, yagis on poles or trees work really well!

I hope you are correct.

>     Next, you'll have to fabricate just about everything. 

We started the project this afternoon and hope to finish it tomorrow.  
>     You could consider a mast-mounted T2X. It'll take the Telrex and all you
>need is a waterpipe lag screwed to the pole. (There are more details but
>that's the macro story.) I've got many tree installs up here using the same
>method and they work FB. 

I took your advice and hacksawed of 18" if 2" I.D. water pipe, and drilled
two 1/2" holes 7" apart in one end.

One problem is that we do not have the mast mounting brackets for the
bottom of the rotor.  We do not have a Tailtwister, but rather what appears
to be a CDE one step smaller than the HAM IV (perhaps a HAM-M) because it
has a bell housing with integral, (non-detachable) mast clamp and an
internal brake.

Can some one help with this?  Where do I find a lower mast bracket?

73

AE0M, Tony Becker - becker@sprintmail.com - Silicon Valley, USA

--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search

<Prev in Thread] Current Thread [Next in Thread>