At 06:34 PM 12/26/97 EST, Steve Morris wrote:
> First of all, yagis on poles or trees work really well!
I hope you are correct.
> Next, you'll have to fabricate just about everything.
We started the project this afternoon and hope to finish it tomorrow.
> You could consider a mast-mounted T2X. It'll take the Telrex and all you
>need is a waterpipe lag screwed to the pole. (There are more details but
>that's the macro story.) I've got many tree installs up here using the same
>method and they work FB.
I took your advice and hacksawed of 18" if 2" I.D. water pipe, and drilled
two 1/2" holes 7" apart in one end.
One problem is that we do not have the mast mounting brackets for the
bottom of the rotor. We do not have a Tailtwister, but rather what appears
to be a CDE one step smaller than the HAM IV (perhaps a HAM-M) because it
has a bell housing with integral, (non-detachable) mast clamp and an
Can some one help with this? Where do I find a lower mast bracket?
AE0M, Tony Becker - firstname.lastname@example.org - Silicon Valley, USA
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com