Towertalk
[Top] [All Lists]

[TowerTalk] Force 12 C-4

To: <towertalk@contesting.com>
Subject: [TowerTalk] Force 12 C-4
From: k6ct@pacbell.net (k6ct)
Date: Tue, 6 Jan 1998 11:32:59 -0800
Hello Guys,
In addition to what Tom is saying, this also happened to me. I did as Tom
suggested PLUS I got some teflon tape from local plumbing supply and wrapped
that around the U where it might "see" the aluminum through the gap in the
PVC. No problems ever since.
73 Tom K6CT

>The PVC insulator has arced over to the U-bolt holding the element. The
slot
>in the PVC should be aligned with the gap between the U-bolt and the
element
>to boom plate. This is the largest air gap and prevents such an occurance.
>The PVC is right within reach. It might be possible to clean it and rotate
>the slot to the gap. If necessary, new insulators can be added without
>removing the element (or antenna).
>
>If you would like new insulators, please respond to this e-mail address and
>it should rach me!
>
>
>
>Have a good day and 73,
> Tom, N6BT
> Force 12 Antennas and Systems
> (Home Page   http://www.QTH.com/force12 )
>
>
>
>
>
>
>
>--
>FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
>Submissions:              towertalk@contesting.com
>Administrative requests:  towertalk-REQUEST@contesting.com
>Problems:                 owner-towertalk@contesting.com
>Search:                   http://www.contesting.com/km9p/search
>


--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search

<Prev in Thread] Current Thread [Next in Thread>