[Top] [All Lists]

[TowerTalk] 32' risers on vhf h-frame

To: <>
Subject: [TowerTalk] 32' risers on vhf h-frame
From: (Bert)
Date: Sun, 01 Feb 1998 17:46:54 -0500
Hi All,

I am setting up a H-frame with 32' vertical risers on each side.
Horizontal separation ~11 feet.

One riser will hold 4 K5GW-10 144 mhz yagis Horizontal 
polarization / vertical Stacking,

The other riser will hold six M^2 9-wl 432 yagis in same configuration as
other side.

I have a design setup for aluminum tubing 2"od (.25 wall) nominaly, but I
would like
consideration on thinwall steel or alloys as well.

Are there any possible 2"od lightweight, thinwall materials which might
the aluminum ?  (keeping economy in mind)

Thanks, Bert - NS4W

FAQ on WWW:     
Administrative requests:

<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] 32' risers on vhf h-frame, Bert <=