At 12:17 PM 2/5/98 -0800, Terry Dunlap wrote:
>At 11:41 AM 2/5/98 -0800, you wrote:
>>At 11:29 AM -0800 2/5/98, Scott Bullock wrote:
>>>>Ron K9YY bought a used electric chain saw at a garage sale and used it to
>>>>bury his cable with...it worked great ...neighbors thought he was crazy
>>>>chain sawing the ground but it make a perfect hole to put the RG6U in... A
>>>>little messy but it did the job...
>>>This idea deserves the prize of the year! Very ingenuitive! I'm gonna use
>>>that this spring to bury cables here-with an old chain tho.
>>Be VERY careful, Scott! If that chain hits a rock and comes apart, it can
>>take your head off!
>You also need to take into consideration the abrasiveness of the soil. If
>you have a lot of "trench" to cut, you run the risk of enlarging the slot
>in the bar to the point of being dangerous.
>73 de Terry KK6T
I burry lines for a living. Take this to the bank.....do it the right way.
A little hard work never hurt anyone. Get out your shovel or do like I do
and use a trenching machine. Unless your luckey enough to own one like I do,
go to your local rental shop and for less than $100 (in most areas) you can
rent one and put in a small trench as long as you want in just a few hours.
The biggest work will be back filling of course, but you will not end up in
the hospital explaining to a room full of laughing medical staff, how you cut
off your hand, arm, leg, ect.....Steve
P.S. always call for locates/utility companies before digging.....be safe!
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com