Towertalk
[Top] [All Lists]

[TowerTalk] Need pop rivet tool for Force 12 antenna info

To: <towertalk@contesting.com>
Subject: [TowerTalk] Need pop rivet tool for Force 12 antenna info
From: harpole@pegasus.cc.ucf.edu (Charles H. Harpole)
Date: Thu, 12 Feb 1998 22:39:03 -0500 (EST)
Urgent need for specs for purchase of pop rivet installer tool for Force
12 antennas--  the C-3 DXpedition version.

Please respond direct to me with very specific info--  I am not too
bright-- about model and kind needed and obtainable from Home Depot type
stores, not ordering not speciality stores, etc.  Please help before my
departure to 9N1 land on Feb. 17.

73, K4VUD

Charlie Harpole, Ph. D.               Bands:  160m thru 440; SSB, CW, Pkt.
3100 North Hwy. 426                   Mobile: 80-10m (100 w) & 146 & 440
Geneva, FL  32732-9761                DXer and Contester:  237 confrmd.
E-mail adr:  harpole@pegasus.cc.ucf.edu
Voice:  (407) 349-2211   Work:  (407) 823-3606   24-hr. FAX: (407) 823-5255
or FAX at home at (407) 349-2211 but voice first.

K4VUD is faculty advisor for the University of Central Florida Amateur 
Radio Club and trustee for its call sign, WB4TCW, and repeater, 146.640 
in Orlando, Fla.  Club has 4 hf rigs, and all modes on 2m & 440.

K4VUD is a member of the 4U1UN Radio Readiness Net, SATURN Ring Salvation 
Army emerg. group, Life Member ARRL, and nice guy (except in contests!).




--
FAQ on WWW:               http://www.contesting.com/towertalkfaq.html
Submissions:              towertalk@contesting.com
Administrative requests:  towertalk-REQUEST@contesting.com
Problems:                 owner-towertalk@contesting.com
Search:                   http://www.contesting.com/km9p/search

<Prev in Thread] Current Thread [Next in Thread>