[Top] [All Lists]

[TowerTalk] Ham IV rotor disassembly

To: <>
Subject: [TowerTalk] Ham IV rotor disassembly
From: (Fred Hopengarten)
Date: Fri, 03 Apr 1998 00:15:22 EST
Fred Hopengarten  K1VR               781/259-0088
Six Willarch Road
Lincoln, MA 01773-5105
permanent e-mail address:

On Fri, 3 Apr 1998 21:27:48 -0500 "James D. Bruce"
<> writes:
>Be carefull not to drop the bearings out, but be prepared to open it 
>over a clean tarp, plastic sheet, or cloth. There is also a tricky part
>re-assembling it. Been there, Done both. Jim/NV3V

>-----Original Message-----

>From: Litwins <>
>To: <>
To: <>
>Date: Wednesday, April 01, 1998 08:18
>Subject: [TowerTalk] Ham IV rotor disassembly
>>Does anybody out there have any experience taking the upper housing 
>off a Ham IV rotor. 

K1VR:  There are only two kinds of people -- those who have spillled Ham
IV ballbearings on the floor, and those who have never taken one apart.

You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at
Or call Juno at (800) 654-JUNO [654-5866]

FAQ on WWW:     
Administrative requests:

<Prev in Thread] Current Thread [Next in Thread>