Fred Hopengarten K1VR 781/259-0088
Six Willarch Road
Lincoln, MA 01773-5105
permanent e-mail address: firstname.lastname@example.org
On Fri, 3 Apr 1998 21:27:48 -0500 "James D. Bruce"
>Be carefull not to drop the bearings out, but be prepared to open it
>over a clean tarp, plastic sheet, or cloth. There is also a tricky part
>re-assembling it. Been there, Done both. Jim/NV3V
>From: Litwins <email@example.com>
>To: firstname.lastname@example.org <email@example.com>
>Date: Wednesday, April 01, 1998 08:18
>Subject: [TowerTalk] Ham IV rotor disassembly
>>Does anybody out there have any experience taking the upper housing
>off a Ham IV rotor.
K1VR: There are only two kinds of people -- those who have spillled Ham
IV ballbearings on the floor, and those who have never taken one apart.
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com
Or call Juno at (800) 654-JUNO [654-5866]
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com