Finally! Here's an answer to all the confusion about cable lubrication on
some U.S. Tower models. I do have the MDP750 motor and I think this may be
why Bruce recommended against lubing the cables. Thanks Skip! This is a
really big help.
73, Dick, WC1M
From: KJ6Y <KJ6Y@aol.com>
To: email@example.com <firstname.lastname@example.org>
Date: Friday, April 03, 1998 9:33 PM
Subject: Re: [TowerTalk] Lubricating US Towers cables and pulleys
>Saw your post on the tower/cable lubricating. If you have the MDP750 motor
>drive, the one with the multiple groove pulley, than you don't want to
>lubricate the cables because they will tend to slip in the pulley and it's
>only friction that keeps the tower up. Tri=Ex uses a similar system on
>Skyneedle modles and I've seen the cables slip. On the other habd I do
>recommend lubrication the pulleys themselves and any bearings.
>Communications service Co.
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com