I just picked up some used Rohn 25 and a 25AG5 top section.
This top section from what I measure is 2.5" id. What size mast is this
top secion made for? If I want to use a 2" mast does anyone sell a
sleeve for it?
I am going to bolt this tower with the Rohn base plate to
a concrete slab behind the house. The house is 16 ft high
in the back, so the house bracket will probably be at 15 feet.
I want to put 40 ft and have 3 guys on it at the top. One
guy to the roof and the other two into the backyard.
The antenna is a HY Gain 10/15 mtr beam that only has 4.5 sq ft.
How long a mast can I safely use with? I have the rotor plate
about 3 ft down into the tower. Does this seem to be a
safe installation considering that I am not setting a base
I emailed Rohn for a catalog however no response yet.
Thanks for help.
73, George KN4AB/2 New Jersey
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com