Fred Hopengarten K1VR 781/259-0088
Six Willarch Road
Lincoln, MA 01773-5105
permanent e-mail address: email@example.com
On Wed, 8 Apr 1998 05:59:15 +0100 "Shane Autrey NC4SA" <firstname.lastname@example.org>
>Now that i have the wiring diagram for the rotor what do i need to do
>so that the control box itself will recognise the direction the motor is
>pointing in. The Ham M control box reads the direction correctly but
>when i wire up the Ham II control box the exact same way the control box
>gives absolutely no indication of direction. It stays all the way over
>the right past the S on the scale.
K1VR: Sound as if you have the calibrate switch ON. Try to push a button
in or throw a switch. Or perhaps the calibrate switch is broken.
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com
Or call Juno at (800) 654-JUNO [654-5866]
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com