[Top] [All Lists]

[TowerTalk] Ham rotor

To: <>
Subject: [TowerTalk] Ham rotor
From: (Fred Hopengarten)
Date: Wed, 08 Apr 1998 10:40:20 EDT
Fred Hopengarten  K1VR               781/259-0088
Six Willarch Road
Lincoln, MA 01773-5105
permanent e-mail address:

On Wed, 8 Apr 1998 05:59:15 +0100 "Shane Autrey NC4SA" <>

>Now that i have the wiring diagram for the rotor what do i need to do 
>so that the control box itself will recognise the direction the motor is
>pointing in. The Ham M control box reads the direction correctly but 
>when i wire up the Ham II control box the exact same way the control box

>gives absolutely no indication of direction. It stays all the way over
>the right past the S on the scale.  

K1VR:  Sound as if you have the calibrate switch ON. Try to push a button
in or throw a switch. Or perhaps the calibrate switch is broken.

You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at
Or call Juno at (800) 654-JUNO [654-5866]

FAQ on WWW:     
Administrative requests:

<Prev in Thread] Current Thread [Next in Thread>