A few years back I constructed a flag pole antenna. The pole was made out of
fiberglass and I used 1 in. copper strap inside the pole with lots of silicone
to glue it to the side. At the base I installed a large radial field out of the
same copper before the concrete was poured. This was in front of a medical lab.
I used the Sea tuner because it would take more power than the Sgc this was
placed in a irrigation box with good drainage level with the concrete this
antenna worked 1.8-30 mhz.
73 Joe W6MR
J & J Antenna Service
> Does anyone have a good design for a full size, quarter wavelength, 40 meter
> vertical-flag pole??
> Bruce, AA4Z
> FAQ on WWW: http://www.contesting.com/towertalkfaq.html
> Submissions: email@example.com
> Administrative requests: towertalk-REQUEST@contesting.com
> Problems: firstname.lastname@example.org
> Search: http://www.contesting.com/km9p/search.htm
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com