In a message dated 98-06-10 22:37:30 EDT, N3SL@aol.com writes:
> I'm going to do the full peripheral
> ground system per the PolyPhaser books. Question (the answer to which I
> cannot find in the book): Should the ground wire be at the French drain
> level, just below ground level, or does it matter at all?
It should be below the frost line. About 2 feet is a good depth as long as
it satisfies the preceeding condition.
Cheers, Steve K7LXC
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com