Hi Mark -
We have a sketch that we have included in our WIREBOOK that, when
followed has worked very well with a minimum of fuss for this job.
Feedback over the years has been 100% positive.
Unfortunately we don't have a scanner or graphic file that we can e-mail,
nor is the pic on the website, but I'd be happy to mail or fax a copy if
We've always used tape like you describe, taking 2 turns around the leg
for a "pad", then including the cable and adding 2 more turns.
Interaction between cables is seldom a problem, unless you use some of
the good old 80% braid stuff that didn'y make it to the junkyard!
Press Jones, N8UG, The Wireman, Inc., Landrum, SC, 29356
Sales(800)727-WIRE(9473) or firstname.lastname@example.org.
Tech help (864)895-4195 or email@example.com
Our 21st year!
On Tue, 16 Jun 98 08:24:16 -0400 "Lowell, Mark"
>Greetings from Gloucester, VA
>I have been looking through the archives and haven't seen any
>about rigging the loops in coax when transitioning from the tower to
>I have two friends with flat-top towers and the coax loops always seem
>tend to bear on the edges of the top plate at some point of rotation.
>are concerned that this will eventually bite through the jacket and
>shield. We have glued pieces of split nylon air hose or garden hose
>these edges to help the problem, but I'm sure some of you must have
>better ideas or rules of thumb for making these loops.
>In my mind, it would seem that a scheme that applies the least amount
>twisting per unit of coax length would fend off fatigue the best.
>In a related matter, what's the best way of attaching the coax runs to
>tower? Are a few turns of good ol' Scotch 33 good enough (If I don't
>the last turn!)? Does having the shield running so close to another
>conductor for so long have any effect on the coax?
>Thanks --...MARK N1LO...--
>FAQ on WWW: http://www.contesting.com/towertalkfaq.html
>Administrative requests: towertalk-REQUEST@contesting.com
FAQ on WWW: http://www.contesting.com/towertalkfaq.html
Administrative requests: towertalk-REQUEST@contesting.com