[Top] [All Lists]


To: <>
Subject: [TowerTalk] 4 SQUARE ORIENTATION
Date: Tue, 30 Jun 1998 12:29:38 -0600

The usual configuration employed by most users is to
align their 4 squares along N/S/E/W lines, with the major
lobes aimed NE, SE, SW,  NW.

As  W8JI points out, the nulls due east and due west
are a bit of a problem with Africa and VK.

More complex switching can be used to obtain
N, S, E, W patterns in addition to the diagonal patterns.

>From the eastern half of the country, there is a simpler 
solution:  ROTATE  the array 15 degrees CLOCKWISE.

This results in main lobes at 60, 150, 240, and 330 degrees
which covers all of Europe, Middle East, Africa, VK/ZL,and 
eastern Asia.

The pattern nulls are at 15, 105, 195, and 285 degrees.
>From the Eastern USA,  almost nobody lives at those
headings.  (OK, you will have to do something else
to have a killer signal into JW, ZS8, CE0X, and P29,
but how often are those places even on the air?

(You already installed a mile of radials and permanent 
supports for NE, SE, SW, NW?   Too bad. )

de  Tom  N4KG

On Tue, 30 Jun 1998 12:02:20 +0000 Tom Rauch
<> writes:

>I'm testing antennas in the mornings with VK's and ZL's, comparing a
>dipole (broadside east-west) at 260 feet height with the 4 square 
>(110 ft in-line spacing with 120/240 degree phasing) and an omni- 
>3/8 wl vertical. The four square points due southwest or northwest, 
>and the dipole feedline and the 260 ft tower located 500 feet due 
>west of the omni- and 4 square puts a null due wes. This null located 
>due west hurts the verticals about 8 dB.

>73, Tom W8JI

You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at
Or call Juno at (800) 654-JUNO [654-5866]

FAQ on WWW:     
Administrative requests:

<Prev in Thread] Current Thread [Next in Thread>